Factories
Process water to a consistent specification, without stopping the line.
Commercial water treatment
Commercial RO systems engineered around your water
Aqua Flex designs, builds and services reverse osmosis plants for buildings that cannot stop when the water does. Every system is sized against a test of your own supply.
FactoriesHealthcareHospitalityInstitutions
Why it is quoted, not priced
A commercial RO plant is not an off-the-shelf purchase
Two buildings on the same road can need completely different plants. These are the seven things that decide yours, and all of them come from a survey rather than a catalogue.
- Source water
- Bore, mains or tanker — each behaves differently
- TDS
- How much is dissolved, and how hard the membrane must work
- Hardness
- Whether a softener is needed ahead of the membrane
- Required output
- The water quality the application actually needs
- Daily demand
- Litres per day at peak, not on average
- Operating hours
- Whether demand arrives in a rush or across a shift
- Application
- Drinking, process, boiler feed or general facility
Applications
Built for sites that cannot stop
What a plant has to survive differs by building. The tolerance for downtime differs even more.
Healthcare
Treated water where consistency is not negotiable and downtime is not an option.
Hospitality
Drinking water for guests and kitchens, at volume, every day.
Education
Safe drinking water across a campus from a single plant.
Process facilities
Feed water conditioned to what the process actually requires.
Commercial buildings
Shared infrastructure serving tenants with very different demands.
System journey
Where the water goes, stage by stage
Five stages between your supply and the outlet. What sits inside each one is decided by the water analysis.
- 1
Raw water
Bore, mains or tanker
Whatever your supply carries at this point is what the plant has to deal with. It is measured before anything is specified.
- 2
Pretreatment
Sand, carbon, softening
Media vessels take out suspended solids and chlorine, and a softener is fitted where the water is hard enough to scale the membrane. This stage exists to protect the most expensive part of the plant.
- 3
RO membrane
High pressure separation
A high pressure pump forces water against a semi-permeable membrane. Water passes; dissolved salts, chemicals and microbes are rejected to drain.
- 4
Post-treatment
Polishing and disinfection
Final conditioning to the quality the application needs — taste polishing for drinking water, further treatment where a process demands it.
- 5
Storage & distribution
Held ready at pressure
Treated water is stored and distributed to the points that need it, sized so demand peaks do not outrun the plant.
System range
Three classes, sized on survey
Capacity follows from your feed water and peak demand, so a commercial plant is quoted rather than priced from a list.
Small commercial
Restaurants, clinics, small schools, offices
- Compact skid, single membrane train
- Pretreatment sized to the supply
- Fits a plant room or service area
Medium commercial
Hospitals, hotels, factories, larger institutions
- FRP pressure vessels with softening where required
- Control panel with flow and pressure monitoring
- Storage sized against peak demand
High-capacity & custom
Process industry, bottling, multi-building sites
- Multiple membrane trains
- Built to specification after a full water analysis
- Designed around process requirements, not a catalogue
Aqua Flex does not publish fixed prices for commercial plants. The cost depends on feed water, capacity, pretreatment, pumps, controls and the site itself — so the honest answer is a quotation against a survey, not a number on a page.
How we design systems
From first call to a plant you can rely on
Seven steps, each one decided by what the water and the site require.
- 01
Water analysis
TDS, hardness and source conditions measured at your supply before anything is quoted.
- 02
System sizing
Capacity worked from peak daily demand and operating hours, not from an average.
- 03
Pretreatment selection
Media, softening and cartridge stages chosen against the reading — fitted only where the water needs them.
- 04
Component configuration
Vessels, pump, membrane housings and controls specified to work together at your pressure.
- 05
Installation
Plumbing, electrical and mechanical work carried out on site.
- 06
Commissioning
Pressure set, recovery checked, and an outlet reading taken so you know what you have before we leave.
- 07
After-sales
Filter and membrane replacement, scheduled servicing and breakdown callouts by the same team.
References
Commercial plants already running
Across 5 sectors, from chemical manufacturing to healthcare.
Chemical manufacturing
Lucky Core Industries
Chemical manufacturing
Ittehad Chemical Industries
Healthcare
Fauji Foundation Hospital
Residential development
Bahria Town Lahore
Industrial
East Gate Industries
Industrial
JEI Hem (Pvt) Limited
Industrial estate
Central Park Industrial Society, Lahore
A selection, rather than a full client list. Detailed project information and further references are available during consultation where appropriate.
Commercial enquiries
Planning a commercial water treatment system?
Tell us the building, the daily requirement and the water source. We will test your supply and quote against the reading. Or call 0300-4334482.